 |
03-13-2019, 08:55 PM
|
#1
|
|
Member
Join Date: Feb 2019
Posts: 76
|
Fuzion 427 Washer/Dryer
All, new to the game. Anyone know what's the best washer dryer for our unit? It's 44' long so plenty adequate, and hookups are in garage next to door that enters into kitchen. THanks in advance!1
|
|
|
|
03-13-2019, 09:33 PM
|
#2
|
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Most often seen are the Splendide units, also Whirlpool and LG. Can always find comments +/- about any of these. Need to be 24" units and the dryer will be 120volt, not 240, unless you have it wired specially for 240.
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
|
|
03-13-2019, 09:37 PM
|
#3
|
|
Member
Join Date: Feb 2019
Posts: 76
|
Thanks wingnut....as always!
|
|
|
|
|
03-14-2019, 03:25 PM
|
#4
|
|
Senior Member
Join Date: Dec 2018
Location: Desert Hot Springs Ca.
Posts: 364
|
Are you looking to install a washer/dryer combo or washer & dryer by itself?
My guess is washer/dryer combo unit as you have a toyhauler. Do you have a vent for the dryer plumbed in from the factory?
__________________
Mike & Trish Romans 10:9
2011 Mobile Suites 36RSSB3 #5556
2017 F-350 CC 6.7 diesel dually, Banks Derringer tuner with super gauge
|
|
|
|
|
03-14-2019, 03:33 PM
|
#5
|
|
Member
Join Date: Feb 2019
Posts: 76
|
Hi, gonna do stackable. No vent but gonna get done. Ventless take forever to dry. THANKS
|
|
|
|
|
03-14-2019, 03:40 PM
|
#6
|
|
Senior Member
Join Date: Dec 2018
Location: Desert Hot Springs Ca.
Posts: 364
|
On the Voltage I had the connections for washer was between the kitchen door & 1/2 bath. We just let it vent into the garage area.
__________________
Mike & Trish Romans 10:9
2011 Mobile Suites 36RSSB3 #5556
2017 F-350 CC 6.7 diesel dually, Banks Derringer tuner with super gauge
|
|
|
|
|
03-14-2019, 04:24 PM
|
#7
|
|
Member
Join Date: Feb 2019
Posts: 76
|
Makes that easy! Thx.
|
|
|
|
|
03-15-2019, 04:58 AM
|
#8
|
|
Senior Member
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
|
Venting needs to be done to the exterior, NOT into the garage. Take the time and install an exterior vent or through the floor. You absolutely do not want all that moisture in that area.
__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
|
|
|
|
|
03-15-2019, 05:45 AM
|
#9
|
|
Member
Join Date: Feb 2019
Posts: 76
|
Thx for the clarification.
|
|
|
|
|
03-18-2019, 11:30 AM
|
#10
|
|
Senior Member
Join Date: Dec 2018
Location: Desert Hot Springs Ca.
Posts: 364
|
I had a ventless drier in a Teton that was a stackable type. It was in the bedroom area. Had for 13 years & never had a problem with that moisture.
In a garage you have a side walk in door & the whole back ramp that drops down. A roof vent or a/c unit plus windows. Now I have to admit we never RVed in the south.
Never had a problem with venting ours into the garage. We always had the rear ramp down and windows & door open when using it.
Reason for no vent is the 1/2 bath black tank was mounted under the floor in that area.
__________________
Mike & Trish Romans 10:9
2011 Mobile Suites 36RSSB3 #5556
2017 F-350 CC 6.7 diesel dually, Banks Derringer tuner with super gauge
|
|
|
|
|
03-18-2019, 11:39 AM
|
#11
|
|
Member
Join Date: Feb 2019
Posts: 76
|
THanks for the info MTK. Going back and forth with this and we live in the North and will be living full time till November in it, until home is built.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hybrid Mode
