![Reply](/forums/images/5thwheel/buttons/reply.gif) |
06-24-2011, 04:00 PM
|
#1
|
Senior Member
Join Date: May 2009
Posts: 321
|
Place to mount inverter
Going to add an inverter to my unit for a residential fridge I'm installing for power while traveling. Looking unit over, seems that in the compartment directly above battery, is the hydraulic controls and a solenoid is there. It goes directly to battery. Would this be a good place to mount inverter?
__________________
__________________
2006 Mobile Suites 32TK3 SOLD 2003 Teton Grand Freedom, 2006 Freightliner Centry 515 hp Detroit 60 Traveling USA welding pipe
|
|
|
06-24-2011, 04:54 PM
|
#2
|
Member
Join Date: Feb 2011
Posts: 81
|
What size inverter are you mounting? You should mount it as close to the batteries as possible to prevent voltage drop & because you will need large cables & they are expensive. I mounted a 2000 watt pure sine wave inverter to the basement ceiling in my Select. You will be much better off with at least 2 batteries.
__________________
__________________
2011 Silverado 3500HD Dually
2010 36RESB3
|
|
|
06-24-2011, 05:30 PM
|
#3
|
Senior Member
Join Date: May 2009
Posts: 321
|
1000 watt pure sine wave. I have plenty of welding cable (check sig). Where I mentioned in previous post is very close to battery. My cables would be 1 foot or less plus length of cables going down to battery. They might be 2 foot max. I will upgrade them to #2 welding cable also. Is the hydraulic compartment a good location? I can see nothing negative mounting it there.
__________________
2006 Mobile Suites 32TK3 SOLD 2003 Teton Grand Freedom, 2006 Freightliner Centry 515 hp Detroit 60 Traveling USA welding pipe
|
|
|
06-24-2011, 06:07 PM
|
#4
|
Senior Member
Join Date: Feb 2009
Location: Retired Okie now in Colorado
Posts: 532
|
Glenn,
On our 2010 38TKSB3, we added the inverter to our list of wants. Here is a picture of the location of ours. Ours is a Xantrex Freedom SW-3000 (I think). Perhaps this will give you an idea. To the left of the inverter (on top of the box) is the front compartment where a generator would go. I believe the bank of 4 batteries is inside that box that the inverter sits on.
Terry
__________________
Terry and Jo
2010 Mobile Suites 38TKSB3 #5332 - 2008 Ford F450
Terry's Smugmug Site
|
|
|
06-25-2011, 10:10 AM
|
#5
|
Senior Member
Join Date: May 2005
Posts: 2,130
|
The hydraulic area might not be a good idea, the stuff is flamable. A leak from the hydraulic system could be unhealthy for the inverter. I'd mount it outside the compartment.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
|
|
|
06-25-2011, 11:16 AM
|
#6
|
Senior Member
Join Date: May 2009
Posts: 321
|
It has plenty of electrical components and connections in there now, motor, solenoid,
__________________
2006 Mobile Suites 32TK3 SOLD 2003 Teton Grand Freedom, 2006 Freightliner Centry 515 hp Detroit 60 Traveling USA welding pipe
|
|
|
06-26-2011, 10:51 AM
|
#7
|
Senior Member
Join Date: May 2005
Posts: 2,130
|
Quote:
Originally Posted by GlennWest
It has plenty of electrical components and connections in there now, motor, solenoid,
|
Should the hydraulic equipment spring a leak it is likely to spread the fluid all over the place. Keeping the converter someplace where it won't get oil sprayed on it could help it stay healthy. It's your rig, do what you want.
__________________
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
|
|
|
![Reply](/forums/images/5thwheel/buttons/reply.gif) |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -5. The time now is 08:32 PM.