add backup lights

[rclemons55]

my 2007 sb3 has backup lights at the top rear on each side. i would like to replace one of the 3 tailights with a clear led fixture and tie it to the backup light circuit. anyone know how to access this circuit without going all the way to the front?

[Mtntrek]

Do you have a 7-pin connector / receiver hitch on the trailer?

Otherwise, pull one of the rear scare light fixtures. There is a separate bulb, socket, pigtail, for the backup circuit. Tie into it. You "might" be able to use a fish tape or section of stiff wire to feed (down through cap) another length of wire to the lower lamp sockets.

[Cummins12V98]

Much better option is to add backup lights to the lower recessed area where the reflectors are.

I had them run a reverse wire to the back at the Factory and Slade at Rolling Retreats added the lights. They are VERY bright!!!