Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 

Go Back   5thWheelForums.com > 5th Wheel Brand Forums > Heartland
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-16-2018, 09:14 AM   #1
HomeAway
Junior Member
 
Join Date: Oct 2018
Posts: 1
Question LIppert camber repair/issues

Bought our new 5th wheel in March 2018. Serious slide issues landed our trailer back at factory where they discovered “negative camber” of the frame, requiring a repair by LIppert. We have been told that our trailer is now 13’6” in height (3 inches taller than brochure) and weighs about 350lbs more. I have concerns about the new height (DOT limits 13’6”, the height of my B&W Companion hitch not aligning correctly, sway/stability issues...etc).

Anyone else experienced this issue? Any other thoughts or concerns?

Thanks in advance...
__________________

HomeAway is offline   Reply With Quote
Old 10-16-2018, 04:43 PM   #2
Notanlines
Senior Member
 
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
The VERY first thing you should do is hook up your rig and tow to a very level lot and YOU measure the height of your highest point, probably the top of your front-most AC. There are a number of ways to do this, probably the simplest being to bring a 10-12 foot 2x4 with you to the roof, lay it across the chosen high spot and measure both sides to the ground, add together and divide by two. NOW you know for sure how high the RV really is.
Next, on the way home, stop by your friendly neighborhood CAT scale and weigh the rig again and compare to the weigh sheet from when you weighed it last and see how it compares. Oops, you say you didn't weight it previously? Well then, look up under the rig and see what was added to make up the extra weight they claim. I wouldn't be too concerned about the 350 pounds, but I would be about the height.
__________________

__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
Notanlines is offline   Reply With Quote
Old 10-16-2018, 09:25 PM   #3
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
Many DRV owners have the 2" riser installed, and some a 3" riser--none of them have reported any clearance problems that I have read about.
I would not be concerned about the height, nor the weight, but longevity of a 'negative camber' correction.
Do you actually know how high it was before they did the repair?
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 12-14-2018, 08:49 PM   #4
Suite Sweets
Senior Member
 
Join Date: Dec 2016
Posts: 107
Apparently the leveling jacks can be adjusted to compensate for their lost effective use, resultant from raising the body several inches. The front legs, as I understand, are not adjustable, but require being cut off and re-welded.

Raising the trailer has made the bottom step that much more difficult to reach, as will be the first rung on the rear ladder.

Carrying this to the ludicrous, you have extra clearance in the wheel well - maybe less likely for blown tires to wreak havoc on the wheel well. But reduced fuel mileage due to the greater wind cavity.

What did you learn about height ?
Suite Sweets is offline   Reply With Quote
Reply

Tags
frame, frame camber, height, lippert frame, trailer height


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 01:57 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×