|
03-28-2021, 01:49 PM
|
#1
|
Member
Join Date: Oct 2020
Posts: 43
|
Shocks
Need shocks foe my 36 RE mobile suites 2004 can someone give me a shock # to order
__________________
|
|
|
03-28-2021, 06:31 PM
|
#2
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,199
|
Monroe #555001
US Made, do a search for the best price.
__________________
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
03-29-2021, 07:02 AM
|
#3
|
Member
Join Date: Oct 2020
Posts: 43
|
Thank you cummins
|
|
|
03-29-2021, 07:07 AM
|
#4
|
Member
Join Date: Oct 2020
Posts: 43
|
Bearings
Going to change bearings should I run never lube or convert to standard with seals and races have drum breaks
|
|
|
03-29-2021, 10:29 AM
|
#5
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,199
|
Are you running sealed bearings?
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
03-29-2021, 10:58 AM
|
#6
|
Senior Member
Join Date: Feb 2009
Location: Retired Okie now in Colorado
Posts: 532
|
Quote:
Originally Posted by monaj02@frontier.com
Going to change bearings should I run never lube or convert to standard with seals and races have drum breaks
|
If your original bearings on your 2004 are Never-Lube, I would change to something else. I've read stories of real issues with the Never-Lube, and in fact, we had two Never-Lube bearings start to leak. We replaced both of our axles for some with bearings that are called EZ-Lube ones. They all have grease zerks for them.
Terry
__________________
Terry and Jo
2010 Mobile Suites 38TKSB3 #5332 - 2008 Ford F450
Terry's Smugmug Site
|
|
|
03-29-2021, 12:48 PM
|
#7
|
Senior Member
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
|
EZ lube with the zerks is a terrible idea and opens you up to pumping your drum with grease. Bad, bad news. Dont let anyone tell you different.
|
|
|
03-29-2021, 02:32 PM
|
#8
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,199
|
I HIGHLY advise contacting MORryde to have your axles replaced with their IS system that has Disk brakes.
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
03-30-2021, 04:49 AM
|
#9
|
Member
Join Date: Oct 2020
Posts: 43
|
Running the never lube Bearings to replace it would be over $600.00 I am thinking of getting new axels with the bearings and new breaks for $900.00 an axel and e done with it that would be the type to pump grease to the bearings but how would you do it not to get grease on the breaks not sure how much more it would be to get the is axels
|
|
|
03-30-2021, 04:51 AM
|
#10
|
Member
Join Date: Oct 2020
Posts: 43
|
How do you maintenance the bearings without getting grease on your breaks
|
|
|
03-30-2021, 02:19 PM
|
#11
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,199
|
What ever you do change to Disk Brakes!!!!!!!
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
03-31-2021, 11:03 AM
|
#12
|
Senior Member
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
|
The bearings are simply removed by the traditional method, cleaned and re-greased. The zerk makes it very easy to fill the cavity and push the seal out the rear, getting grease on the brakes. If properly done, and tightened there is no reason to add grease for the season.
__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
|
|
|
03-31-2021, 12:56 PM
|
#13
|
Senior Member
Join Date: Jun 2009
Posts: 463
|
Quote:
Originally Posted by Notanlines
The bearings are simply removed by the traditional method, cleaned and re-greased. The zerk makes it very easy to fill the cavity and push the seal out the rear, getting grease on the brakes. If properly done, and tightened there is no reason to add grease for the season.
|
The zerks came from the trailer boating world.
Don't know why they were carried over to the RV's
The clean and repack every year is over kill if it was done properly in the first place and quality parts used.
__________________
Thanks,
Duane
2019 DRV MS 39DBRS3 ---> Flexible Flyer
2020 F-450
|
|
|
03-31-2021, 01:13 PM
|
#14
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,199
|
" The zerk makes it very easy to fill the cavity and push the seal out the rear, getting grease on the brakes. If properly done, and tightened there is no reason to add grease for the season."
I keep hearing this, have you PERSONALLY had this happen?
I used this system for 4 years without a single issue of grease coming out the back seal.
I have since changed to oil bath using quality National seals.
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
03-31-2021, 01:17 PM
|
#15
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,199
|
I did the push pull wheel bearing test when RV was new and then greased using the ZERK and AMZ/OIL grease having someone rotate the tire while I pumped grease into the spindle and when red grease was coming out the front I wiped up the excess and replaced the cap. Wash Rinse Repeat every year and never opened it up.
When I pulled it all apart to start over from the spindle out with Timken bearings, National Seals, new rotors, new EBC yellow pads and new calipers the bearings and races looked new.
I run 17,500# on my two axles. I also never had one spec of grease coming past the seal.
This is simply an Old Wives tail. Unless you use the wrong or junk seals and use an electric grease gun.
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
04-01-2021, 05:29 PM
|
#16
|
Senior Member
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
|
Cummins, no I have not because I don't have the zerks, know that it is the wrong thing to do, and have known for years that it came from the boat industry. RV forums have any number of posts about people who have done it.
Go ahead and recommend it if you like. It is simply the wrong thing to do.
Porthole, "The clean and repack every year is over kill if it was done properly in the first place" while I agree with what you said, most RV forums will return a veritable myriad of replies saying otherwise.
__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
|
|
|
04-02-2021, 09:48 AM
|
#17
|
Senior Member
Join Date: Jun 2009
Posts: 463
|
Quote:
Originally Posted by Notanlines
Porthole, "The clean and repack every year is over kill if it was done properly in the first place" while I agree with what you said, most RV forums will return a veritable myriad of replies saying otherwise.
|
You left off a key part of my comment.
Quote:
Originally Posted by porthole
and quality parts used.
|
As to the myriad of RV forums, well.......
But for conversation, I had MOR/ryde IS and disc brakes installed on our 2010 Cyclone while still at the dealer, so less than 5 miles on the original hardware.
MOR/ryde ended up installing the wrong IS (7K) at that time and 4 years/22,000 miles later
MOR/ryde replaced it with 8K IS. Non china Timken and CR parts used
At that time the bearings, grease, seals looked as good as the day they were installed 4 years earlier.
I would agree any towable should probably have bearings at least checked within the first year.
__________________
__________________
Thanks,
Duane
2019 DRV MS 39DBRS3 ---> Flexible Flyer
2020 F-450
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|