|
07-09-2021, 06:20 PM
|
#1
|
Junior Member
Join Date: Aug 2018
Posts: 14
|
Led lights
I have an 18 MS 38rssa. One of my bathroom led lights went out. Are you guys using the original style of lights or have you found a better kind of light?
__________________
|
|
|
07-11-2021, 06:08 PM
|
#2
|
Member
Join Date: May 2013
Location: Where ever we’re parked
Posts: 50
|
I replaced all of mine with Falcon puck lights. Fit in the same hole. They have spring clips to hold them in, but they had holes for screws. I removed the spring clips and used the screws from the old lights. I got tired of replacing those Command Electronics circuit boards. It’s only been 2 months since I replaced them so too soon to tell. But I like the light ares spread on these.
All of the reviews I read were positive except for one who claimed the lights dimmed when he flushed his tecma toilet while on battery. I installed one, turned off the AC at the pedestal and tried it myself. No problem.
__________________
__________________
2019 Mobile Suites 40KSSB4
2018 F-450 Ford King Ranch
Full time since 2008
|
|
|
07-12-2021, 07:32 AM
|
#3
|
Senior Member
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
|
As John pointed out, the Falcons will do pretty good job for you. We used two packs of these some years ago in or Raptor.
https://www.amazon.com/Facon-4-5Inch.../dp/B01MR7K91R
__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
|
|
|
07-18-2021, 04:43 PM
|
#4
|
Junior Member
Join Date: Aug 2018
Posts: 14
|
Can I just replace the board or do I have to replace the whole light fixture?
|
|
|
07-18-2021, 06:07 PM
|
#5
|
Senior Member
Join Date: Nov 2016
Location: Southeastern Wisconsin
Posts: 101
|
You can replace just the LED boards. I bought some from Command Electronics. As the old ones start flickering I’ll be replacing them with the new boards.
Dan
|
|
|
07-19-2021, 10:30 PM
|
#6
|
Member
Join Date: May 2013
Location: Where ever we’re parked
Posts: 50
|
I called Command Electronics and explained what was happening. I was asked to send a picture of the circuit board. I did and they said it was part of a bad batch and sent me 50 replacement boards N/C. I was replacing on an as needed basis. Ticked me off that I was replacing some boards 2 and 3 times. I called them again and they sent me 25 more. They still kept failing. My search then began for a replacement light altogether and found the Facon lights.
__________________
2019 Mobile Suites 40KSSB4
2018 F-450 Ford King Ranch
Full time since 2008
|
|
|
07-27-2021, 12:34 PM
|
#7
|
Junior Member
Join Date: Aug 2018
Posts: 14
|
Command electronics is out of the 4.5” leds and boards. Can’t find the on Amazon either.
|
|
|
08-16-2021, 08:05 AM
|
#8
|
Member
Join Date: Jul 2021
Location: NJ
Posts: 69
|
So how are these lights need to replace the 3 clip dim ones over center of coach they don’t want to be bright need just the Lower watt ones any suggestions or just go with the falcon
|
|
|
08-16-2021, 04:34 PM
|
#9
|
Senior Member
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
|
5050, I'm guessing at your post.
"So, how are these lights? I need to replace the 3 clip dim ones over the center of the coach. They don’t want to be bright, I need just the lower watt ones. Any suggestions or just go with the Falcon?"
I also post sometimes with the IPhone, but just a little punctuation helps when we're trying to read a post.
__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
|
|
|
08-16-2021, 08:17 PM
|
#10
|
Member
Join Date: Jul 2021
Location: NJ
Posts: 69
|
They are the low light over sink in center of the RV they only have 3 little crystals so they are just accent lights the ones that pop up when you search for them have 6-9 led crystals in them that’s what I was asking the falcon light is it replacement to go with
|
|
|
08-16-2021, 08:27 PM
|
#11
|
Member
Join Date: Jul 2021
Location: NJ
Posts: 69
|
They say 2 watts on housing
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -5. The time now is 02:35 AM.