2013 38RSSB3 electrical

Lej · 03-25-2022, 12:08 PM

Hi folks, this is my 1st post here. While installing new 6 volt batteries in my MS I momentarily reversed the cables! As a result I lost power to all four slides, 2 hyd and 2 elect. I have full 12v on all other systems. I replaced the 3 30A fuses at the converter and don't see any others blown. None of the blade fuses in the power control panel are blown. I suspect the 30A relay or the solenoid at the hyd pump. Any ideas? Thanks for the assist.

Cummins12V98 · 03-26-2022, 10:06 AM

I would look at the relays. Welcome aboard!

Lej · 03-30-2022, 02:40 PM

Quote:

Originally Posted by Cummins12V98

I would look at the relays. Welcome aboard!

Thank you for your suggestion. I located a blown fuse that I looked at 3 times! Had to pull it to see it was broken at the bottom! Good lesson, pull and look!

Cummins12V98 · 03-30-2022, 03:18 PM

Glad you figured it out!