 |
06-10-2023, 10:45 AM
|
#1
|
|
Junior Member
Join Date: Jul 2012
Location: Fulltiming from FL
Posts: 14
|
Timken Bearings
I'll be replacing the wheel bearings on a 2021 DRV Mobile Suites 38RSSA. I believe it has the 9K axles but don't find it listed anywhere. Anyone know for sure if it is 9K?
Also would appreciate knowing the part numbers for Timken bearings and the best place to buy them.
__________________
__________________
2021 DRV 38RSSA
2021 Ram 3500 dually, 6.7 HO, Aisin trans and 4:10 differential
|
|
|
|
06-10-2023, 11:24 AM
|
#2
|
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,201
|
Does your caliper look like this? If so it's 8k. It will say KODIAK 250 on the side you can see under the RV.
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
|
|
06-10-2023, 11:48 AM
|
#3
|
|
Junior Member
Join Date: Jul 2012
Location: Fulltiming from FL
Posts: 14
|
Thanks for the info. Tough to see with the wheel on but it has 338HD and Kodiak beneath the number. Is that the 9K number?
__________________
2021 DRV 38RSSA
2021 Ram 3500 dually, 6.7 HO, Aisin trans and 4:10 differential
|
|
|
|
|
06-10-2023, 07:32 PM
|
#4
|
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,201
|
Quote:
Originally Posted by Pvsaint
Thanks for the info. Tough to see with the wheel on but it has 338HD and Kodiak beneath the number. Is that the 9K number?
|
Don't know for sure but I would think so.
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
|
|
06-11-2023, 08:19 AM
|
#5
|
|
Member
Join Date: Apr 2013
Location: Carstairs Alberta
Posts: 40
|
Can you tell if it has bolts or clips holding the caliper on (8K bolts through the caliper to retain, 9K clips holding the caliper on)
__________________
2018 Mobile Suites 38RSSA previous 2013 Cedar Creek, Cyclone toy hauler, and 3 previous Artic Fox rvs
2023 Ford F350
|
|
|
|
|
06-11-2023, 11:38 AM
|
#6
|
|
Senior Member
Join Date: Jun 2009
Posts: 465
|
Quote:
Originally Posted by Pvsaint
Thanks for the info. Tough to see with the wheel on but it has 338HD and Kodiak beneath the number. Is that the 9K number?
|
338HD caliper is the 10 k caliper used on 8-10k axles.
That should mean, you have the 9K suspension.
9K axles with the 10k calipers have the calipers sitting at the 12 o’clock position and retained in the bracket by two clips.
|
|
|
|
|
06-11-2023, 08:54 PM
|
#7
|
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,201
|
Earlier 9k had slide bolts also.
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
|
|
06-12-2023, 12:40 AM
|
#8
|
|
Senior Member
Join Date: Jun 2009
Posts: 465
|
Quote:
Originally Posted by Cummins12V98
Earlier 9k had slide bolts also.
|
But they were not 338HD calipers
|
|
|
|
|
06-12-2023, 12:41 AM
|
#9
|
|
Senior Member
Join Date: Jun 2009
Posts: 465
|
Quote:
Originally Posted by Pvsaint
I'll be replacing the wheel bearings on a 2021 DRV Mobile Suites 38RSSA. I believe it has the 9K axles but don't find it listed anywhere. Anyone know for sure if it is 9K?
Also would appreciate knowing the part numbers for Timken bearings and the best place to buy them.
|
Since you have a 38 there is a slight chance you have 8.4K axles. You should pull the wheel to get a better look.
|
|
|
|
|
06-15-2023, 10:41 AM
|
#10
|
|
Member
Join Date: Sep 2015
Posts: 36
|
Original 9K do have 338 calipers, I have them on our rig and I have ALSO had some VERY BAD work done by Morryde at their Service Center in IND. Just found that 5 of the 8 slide bolts were missing on my 338 calipers and Morryde says it was part failure , not their problem!!! Dexter said missing parts are installation problem, not part failure . I PAY AGAIN !!!!!!! Will NOT use MOR-LESS again !!! BUYER BEWARE
__________________
2013 RAM DRW 6.7 HO w/ Aisin 3:42
2016 MS 41 RSSB4 " Modified "
1200 w SOLAR 400 A LiOn Batts
|
|
|
|
|
06-19-2023, 09:47 AM
|
#11
|
|
Member
Join Date: Sep 2015
Posts: 36
|
Just got a call from Lindsey over at Mor-Ryde and they are going to send a check to cover my parts cost !! THANK YOU !!!! Nice to see that happens, restores by faith in America ! Mor-Ryde Back on Top !!!!
__________________
2013 RAM DRW 6.7 HO w/ Aisin 3:42
2016 MS 41 RSSB4 " Modified "
1200 w SOLAR 400 A LiOn Batts
|
|
|
|
|
06-19-2023, 09:55 AM
|
#12
|
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,201
|
It made no sense they would not reimburse as they were clearly at fault. Happy ending!!!
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
|
|
06-20-2023, 09:37 AM
|
#13
|
|
Junior Member
Join Date: Jun 2020
Posts: 7
|
Yes, they're 9K.
Quote:
Originally Posted by Pvsaint
I'll be replacing the wheel bearings on a 2021 DRV Mobile Suites 38RSSA. I believe it has the 9K axles but don't find it listed anywhere. Anyone know for sure if it is 9K?
Also would appreciate knowing the part numbers for Timken bearings and the best place to buy them.
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
