|
05-10-2016, 07:21 AM
|
#1
|
Junior Member
Join Date: Jun 2014
Posts: 11
|
FREE 4 - 7k Neverlube Hubs and Brake Assemblies
I have 4 - 7K Neverlube Hubs and Drum Brake Assemblies complete that are free for pickup in Wapakoneta,Ohio. Nothing wrong with them I just installed the Kodiak disk brake kit and hate to throw these away. email is quickest contact at mjmetz@bright.net
__________________
|
|
|
05-10-2016, 09:37 AM
|
#2
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Thats a good deal for someone who has the setup already. Just remember the NevRLube bearings will NOT fit on the standard bearing 7k axles.
__________________
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
05-10-2016, 02:46 PM
|
#3
|
Senior Member
Join Date: May 2005
Location: Home Prescott, Az
Posts: 1,019
|
Quote:
Originally Posted by wingnut60
Thats a good deal for someone who has the setup already. Just remember the NevRLube bearings will NOT fit on the standard bearing 7k axles.
|
Are you sure? I had 7,000lb axles with those bearings. Hard to believe they made different axles to accommodate the two bearings. I might be wrong, but I do know i had them on my trailer.
__________________
2013 Tiffin Allegro 34 QFA
2015 Cadillac SRX (towed)
2019 Tesla Model X
1991 Avanti Conv
|
|
|
05-10-2016, 07:01 PM
|
#4
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Pretty sure, maybe 99%--the spindles have to be machined to fit the NevRLubes. It is my understanding you can't just replace one type with the other. I certainly don't recall any posts from someone who did the exchange without the axles.
Somewhere in the past posts on this or the Suites Owners forums, is a pic of the spindles side by side, definitely a difference.
Certainly, if anyone is thinking to do this, I would call Dexter and confirm one way or the other.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
05-10-2016, 07:04 PM
|
#5
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
METZCOOL,
You had the NevRLubes on the Kodiak hubs, also, right?
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
05-10-2016, 08:33 PM
|
#6
|
Junior Member
Join Date: Jun 2014
Posts: 11
|
These are the 50 mm hubs so you would need that size spindle. They came off of the morryde independent suspension and the new hubs from kodiak slid right back on. Your axle spindles need to be 50mm from Morryde, Dexter, or Kodiak according to Kodiak rep I talked with.
|
|
|
05-10-2016, 08:34 PM
|
#7
|
Junior Member
Join Date: Jun 2014
Posts: 11
|
Quote:
Originally Posted by wingnut60
METZCOOL,
You had the NevRLubes on the Kodiak hubs, also, right?
|
Yes, the new Kodiak hubs came with new Neverlubes pressed in.
|
|
|
05-10-2016, 08:39 PM
|
#8
|
Junior Member
Join Date: Jun 2014
Posts: 11
|
Quote:
Originally Posted by Stripit
Are you sure? I had 7,000lb axles with those bearings. Hard to believe they made different axles to accommodate the two bearings. I might be wrong, but I do know i had them on my trailer.
|
Were they the ez lubes and not the neverlubes? Reason being is kodiak ask me to make sure as the neverlubes came in one size and the ez lubes came in different sizes.
|
|
|
05-11-2016, 11:10 AM
|
#9
|
Senior Member
Join Date: May 2005
Location: Home Prescott, Az
Posts: 1,019
|
Quote:
Originally Posted by METZCOOL
Were they the ez lubes and not the neverlubes? Reason being is kodiak ask me to make sure as the neverlubes came in one size and the ez lubes came in different sizes.
|
No I had never lube bearings with my 7,000 axles. I would jack the trailer up every year, lube the shackles and feel the wheels for any free play. Had the wheels pulled every other year to inspect brakes and clean things up. Never had an issue with the bearings but did have issues with the clips that held the brake shoes in place. They would snap off and I had to replace those.
__________________
2013 Tiffin Allegro 34 QFA
2015 Cadillac SRX (towed)
2019 Tesla Model X
1991 Avanti Conv
|
|
|
05-12-2016, 08:52 PM
|
#10
|
Senior Member
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
|
Boy....! I sure could use those.
Unfortunately we're not very close.
It would be pretty expensive and a bear to ship.
Ohh well....somebody close that needs those will be pretty darn happy.
Rick
__________________
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|