Replacement center caps

Dapperdan · 08-02-2021, 09:52 PM

I'm trying to find a replacement center cap for my Hi Spec 17.5" wheels. This is off of a 2019 DRV with 9k axles. I lost one center cap on the way to MORryde yesterday. One of the screw sections was slightly cracked, I tried fixing it, obviously that didn't work too well.

Can anyone steer me in the right direction for a replacement. I went to HI Spec's website but it doesn't appear as though they're listed on there, at least I couldn't find them. I'm looking for the cap the is held on the wheel with two screws. Any help would be gratefully appreciated. Thanks in advance.

Dan

ARCliz · 08-03-2021, 01:17 AM

I hate to say it ,but try Amazon

ford truck guy11 · 08-03-2021, 08:57 AM

I purchased my Hi-Spec wheels from - https://recstuff.com/accessories/whe...selling&page=1 Go and contact them, they are very easy to chat with and will hopefully be able to help either sell you, or point you in the right direction.

Cummins12V98 · 08-03-2021, 12:29 PM

Dan, 2019???

porthole · 08-04-2021, 03:45 AM

HiSpec

(574) 807-8588
(574) 807-8589
warranty@hispecwheel.com

Dapperdan · 08-04-2021, 05:07 PM

Quote:

Originally Posted by Cummins12V98

Dan, 2019???

Yeah, we "accidentally" bought a newer unit at Whisky Mountain (Mesa) while in Chandler this spring.

Dan

Dapperdan · 08-04-2021, 05:15 PM

Thanks for the tip Duane. Go to the manufacture, what a concept!

BTW, while at MORryde for an alignment and brake line re-route I had a conversation with Gary Wheeler. Gary told me MORryde is now using the "new & improved" hardened caliper clips! The ones Randy gave me were in great shape but Eric (my tech) put new ones on per Gary, ALL 9k axels are getting switched out at MORryde as they are coming in for service! MORryde is building their 9k IS axles with the hardened clips as well.

Dan

Cummins12V98 · 08-04-2021, 11:20 PM

Quote:

Originally Posted by Dapperdan

Yeah, we "accidentally" bought a newer unit at Whisky Mountain (Mesa) while in Chandler this spring.

Dan

GREAT, I hope you have ZERO paint issues as you had your share on your last rig!!!

Dapperdan · 08-05-2021, 07:32 AM

NO paint issues on this rig Ron! So far we're very pleased! The 9k axles are "new" to me, the up-side is MUCH better braking ability.

Dexter is "working through" a serious issue with the caliper clips on the 9ks. You've been following Porthole's situation I'm sure. According to Randy at Dexter it a pretty wide-spread issue and they're working hard on resolving the it. The "new" clips seem to be the answer but time will tell.

Dan

porthole · 08-05-2021, 08:37 AM

Quote:

Originally Posted by Dapperdan

Thanks for the tip Duane. Go to the manufacture, what a concept!

Ive dealt with HiSpec 3 times so far, twice with wheel failures on the previous trailer and once with center caps in this rig.

Each time it was a much better experience then dealing with the RV manufacturers.

stanleyz · 08-09-2021, 04:06 PM

I just got some. Im on the road right now but if you dont have it by Thursday Ill check the paperwork and respond here. But try trailers.net or Amazon. Thats where I get mist things.