Level up controller no power

[stevencoles@msn.com]

The level up controller on our 2014 38RSB3 wont turn on. There is plenty of 12V power to the rest of the trailer but nothing happens when I press the on button on the controller., Unit has been in storage for 10Moi. But hooked to 30Amp power and new batteries about 2 moths ago that have been on a maintenance charge since installation. The battery disconnect switch has been engaged to disconnect the batteries. Any suggestions on what might be causing the controller to be inoperative?

 

[Porkchop-THOR]

"The battery disconnect switch has been engaged to disconnect the batteries. "

Not sure exactly what you mean by this, but 'reengage' the battery switch to reconnect the batteries. Then it should work correctly.

Bill

 

[stevencoles@msn.com]

I did reengage the switch still nothing

 

[Cummins12V98]

Give Lippert Tech a call they have been really helpful.

 

[B&P]

This happened to me a couple of times. I have the blue touch screen and there is a reset button under the screen you need a paper clip to push it. Hope this helps

 

[AlmostRetired-THOR]

Level Up Control Panel

I destroyed my batteries and didn’t have enough power to even light the control panel box. Called Level Up after I had fixed power issue and they walked me through a reset. Had to disconnect a couple wires (easily accessed) and that reset. The panel still wouldn’t light up but they provided the sequence of which buttons to push without visual guidance and I got it to function. Once the 12V system was charged everything worked fine and I had no further issues.