Winegard 360+

Wildcat-5TH

New Member
Joined
Sep 21, 2021
Messages
7
My fithwheel came with winegard 360+ installed and no info was supplied to confirm the antanna is turned on. The only time I've noticed the antannas were working was when I was plugged into 50amp service.
 
Last edited:
This is a 12 volt system. I would check with a test light when not on the 120 volt pedestal. I might further add that there are no moving parts in it, and receives terrible reviews. I wish I had good news for you.
 
I think the only way to test the voltage is to take the dome off the roof to get to the leads.
 
Also, you should be able to download the user's manual. I have seen some setups with a on/off switch for the router.
 
It's not the router I'm concerned about just the antanna. I have no way to tell if the antanna is getting 12volts without tearing the dome off the roof.
 
Are you able to drop the router and mounting box and get to the wires to measure for voltage? Another idea is to turn on your TV and find a good signal and then pull the fuse on your 12-volt fuse panel.
 
Last edited:
The TV antenna has a signal amplifier. Somewhere in a cabinet probably near the TV is a switch that powers it. It’s powered by your battery. I don’t know where the poster above gets it’s gotten bad reviews. We have been thru 15 states this summer & get as many channels as any other RV antenna. Go to antenna web.org & put in the zip code where you are & the website will tell you how many channels you should get. Hi n addition if you attach a gateway 1000 to it you will have WIFI.
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom